अपडेट
केस साक्ष्य: मूल ब्रेकडाउन रिपोर्ट पढ़ें · केस फ़्रेम और शॉट समय देखें
प्रकाशित टूल रिपोर्ट पर आधारित। निर्माण वर्गीकरण विश्लेषणात्मक निर्णय हैं; सुझाए चरण मूल प्रोजेक्ट या सत्यापित रीमेक नहीं हैं।
Start with the actual timeline
The dual-role report covers a 19-second (0:19) vertical video with 10 shots. It classifies five character shots as AI-generated and the other five as code or template rendering built around interface screenshots, for an overall mix of 59% code/template rendering and 41% AI-generated video. Those are report judgments, not verified production history. For prompt writing, the important finding is the alternation: a character moment is followed by a screen or interface segment. One prompt for all 19 seconds would mix two different production tasks.
Choose one shot before writing a sequence
Shot 2 runs from 00:01.375 to 00:02.833 (about 1.5 seconds); shot 3 from 00:02.833 to 00:03.875 (about 1.0 second). The report describes a short-haired young woman holding a phone on a sofa, and a second character in a newsboy cap holding a white mug in an armchair. Make a separate brief for each: subject reference, pose, framing, action, background and duration. The report itself suggests generating about 4 seconds for shot 2 and trimming to 1.5, because very short shots are unstable when generated alone. Keep the observed timeline as the edit target, not as a duration the generator must hit.
Describe motion without inventing a camera setup
For the phone shot, the report's prompt has the woman look up from her phone toward frame right, eyebrows raised and mouth open, while the phone moves slightly, ending on her surprised face, with a locked-off camera. That instruction keeps subject motion separate from a fixed camera. Avoid adding an orbit, a push-in and a rapid pose change simply to make the prompt sound cinematic. The report's lighting notes also disagree: the pixel measurement reads the light as cool, while the visual review describes a warm floor lamp mixed with cool phone-screen light. Inspect the reference frame and record what is visible rather than naming a specific lamp or lens as fact.
Keep UI, captions and voice outside the picture prompt
The report groups character shots 2, 3, 5, 7 and 9 separately from interface shots 1, 4, 6, 8 and 10. Its AI plan turns the five character shots into four generation units: shots 5 and 7, which share the living-room set, form one multi-shot unit, while shots 2, 3 and 9 are generated one at a time. Use that division to plan your work: prepare character references, capture your own interface, and add readable labels in an editor or code composition. On sound, the report leans toward the dialogue having been generated with the picture (65%, unconfirmed) and found no music bed; whichever route you take, keep the lines in a separate timed list so you can adjust pauses without rewriting every visual description. The grouping is a planning aid, not a promise that every model supports multi-shot generation.
Test consistency, then restore the edit
Start with one character shot and check face consistency, hand-object contact, framing and background stability. If the result fails, change the instruction that controls the failure instead of appending unrelated adjectives. Once the character material works, place the UI inserts back between the shots and align speech with the revised cut. This article explains how to use the report; it does not claim a tested recreation or recover the original model settings.
पुन: प्रयोग योग्य विश्लेषण टेम्पलेट
Shot ID and reference time Character reference / pose / object interaction Framing / camera motion / subject motion Visible lighting and background Target duration / start state / end state Separate tracks: dialogue / UI / captions Test result / uncertainty / next adjustment
असली रिपोर्ट के साथ अभ्यास
Read the original generation-unit and code-compositing sections alongside the shot table. They show how the same timeline can require different instructions for characters and UI.
केस खोलें और रिपोर्ट डाउनलोड करें →अपना वर्कफ़्लो जारी रखें
- वीडियो से प्रॉम्प्ट: अवलोकन को निर्देश में बदलें
- YouTube वीडियो से प्रॉम्प्ट: रेफ़रेंस का प्रति-शॉट विश्लेषण
- आपका वीडियो प्रॉम्प्ट रेफ़रेंस से मिलता क्यों नहीं
- वीडियो रिवर्स इंजीनियरिंग: प्रति-शॉट निर्माण तरीक़ा और रीमेक
- Veo 3 प्रॉम्प्ट: रेफ़रेंस से प्रति-शॉट निर्माण
- Sora प्रॉम्प्ट: रेफ़रेंस से प्रति-शॉट लिखें
- Claude Code या Codex में शुरू करें